[討論] STM32F405RG開發板

[複製鏈接]

洪嵐峰

2609 主題	0 好友	1003 積分

金牌會員

Rank: 6 Rank: 6

UID: 373967
帖子: 9008
主題: 2609
精華: 0
積分: 1003
楓幣: 0
威望: 980
存款: 35891
贊助金額: 0
推廣: 0
ＧＰ: 1205
閱讀權限: 70
在線時間: 460 小時
註冊時間: 2023-1-12
最後登入: 2024-12-22

發消息

電梯直達

1樓

發表於 2023-4-27 19:49:23 |只看該作者 |倒序瀏覽

製作一個多功能示波器需要以下零件：

STM32F405RG開發板
TFT彩色液晶顯示屏
AD轉換器模塊
功率放大器模塊
電池或電源模塊
按鈕模塊
搖杆模塊
溫度傳感器模塊
USB轉串口模塊

以下是示波器程式碼範例：

#include "stm32f4xx.h"
#include "stm32f4xx_gpio.h"
#include "stm32f4xx_rcc.h"
#include "stm32f4xx_adc.h"
#include "stm32f4xx_dac.h"
#include "stm32f4xx_tim.h"
#include "stm32f4xx_exti.h"
#include "stm32f4xx_syscfg.h"

#define ADC1_DR_ADDRESS ((uint32_t)0x4001204C)

void TIM4_IRQHandler(void)
{
  if (TIM_GetITStatus(TIM4, TIM_IT_Update) != RESET)
  {
TIM_ClearITPendingBit(TIM4, TIM_IT_Update);
GPIO_ToggleBits(GPIOD, GPIO_Pin_15);
  }
}

void ADC_IRQHandler(void)
{
  if (ADC_GetITStatus(ADC1, ADC_IT_EOC) != RESET)
  {
DAC_SetChannel1Data(DAC_Channel_1, ADC_GetConversionValue(ADC1)>>4);
ADC_ClearITPendingBit(ADC1, ADC_IT_EOC);
  }
}

void EXTI0_IRQHandler(void)
{
  if(EXTI_GetITStatus(EXTI_Line0) != RESET)
  {
TIM_Cmd(TIM4, ENABLE);
EXTI_ClearITPendingBit(EXTI_Line0);
  }
}

int main(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;
  NVIC_InitTypeDef NVIC_InitStructure;
  TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
  DAC_InitTypeDef DAC_InitStructure;
  ADC_CommonInitTypeDef ADC_CommonInitStructure;
  ADC_InitTypeDef ADC_InitStructure;
  EXTI_InitTypeDef EXTI_InitStructure;
  SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOA, EXTI_PinSource0);

  RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOD, ENABLE);
  RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE);
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);

  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_15;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
  GPIO_Init(GPIOD, &GPIO_InitStructure);

  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN;
  GPIO_Init(GPIOA, &GPIO_InitStructure);

NVIC_InitStructure.NVIC_IRQChannel = TIM4_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);

NVIC_InitStructure.NVIC_IRQChannel = ADC_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);

NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);

TIM_TimeBaseStructure.TIM_Period = 1000 - 1;
TIM_TimeBaseStructure.TIM_Prescaler = 84 - 1;
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM4, &TIM_TimeBaseStructure);

DAC_InitStructure.DAC_Trigger = DAC_Trigger_None;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
DAC_Init(DAC_Channel_1, &DAC_InitStructure);

ADC_CommonInitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_CommonInitStructure.ADC_Prescaler = ADC_Prescaler_Div2;
ADC_CommonInitStructure.ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled;
ADC_CommonInitStructure.ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_5Cycles;
ADC_CommonInit(&ADC_CommonInitStructure);

ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
ADC_InitStructure.ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfConversion = 1;
ADC_Init(ADC1, &ADC_InitStructure);

ADC_RegularChannelConfig(ADC1, ADC_Channel_TempSensor, 1, ADC_SampleTime_84Cycles);

ADC_ITConfig(ADC1, ADC_IT_EOC, ENABLE);

EXTI_InitStructure.EXTI_Line = EXTI_Line0;
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
EXTI_InitStructure.EXTI_LineCmd = ENABLE;
EXTI_Init(&EXTI_InitStructure);

ADC_Cmd(ADC1, ENABLE);

while (1)
{
}
}

這個程式碼使用了定時器4（TIM4）、DAC、ADC、外部中斷等模塊來實現簡單的示波器功能。

其中，TIM4用於產生定時中斷，DAC用於控制音量，ADC用於測量溫度，外部中斷用於控制示波器的啟動。

如果需要實現更多功能，可以根據需要添加相應的模塊和代碼。