冰楓論壇

標題: STC12C5608AD-35I-SKDIP28製作WIFI無線監視器 [打印本頁]

作者: 洪嵐峰 時間: 2023-4-8 07:25
標題: STC12C5608AD-35I-SKDIP28製作WIFI無線監視器
STC12C5608AD-35I-SKDIP28是一款8051系列的微控制器
您可以使用它來製作WiFi無線監視器。

以下是您需要的零件列表：

STC12C5608AD-35I-SKDIP28微控制器
ESP8266 WiFi模塊
攝像頭模塊
電容器和電阻器
電源適配器和連接線
杜邦線
您可以使用下面的鏈接來查看STC12C5608AD-35I-SKDIP28微控制器的引腳佈局：

https://www.stcmcu.com/datasheet ... -series-english.pdf

下面是示例代碼，可用於ESP8266模塊與STC12C5608AD-35I-SKDIP28微控制器之間的通信。該代碼可以通過串行通信從ESP8266模塊接收數據，並將其顯示在液晶顯示器上。

#include <reg52.h>
#include <intrins.h>
#include <stdio.h>
#include <string.h>

sbit ESP8266_RTS = P1^1;
sbit ESP8266_CTS = P1^0;
sbit ESP8266_RST = P1^2;

sbit RS = P2^0;
sbit RW = P2^1;
sbit E = P2^2;
sbit LCD_D4 = P2^4;
sbit LCD_D5 = P2^5;
sbit LCD_D6 = P2^6;
sbit LCD_D7 = P2^7;

void delay(unsigned int i);
void LCD_Init(void);
void LCD_WriteCommand(unsigned char Command);
void LCD_WriteData(unsigned char Data);
void LCD_WriteString(unsigned char x,unsigned char y,unsigned char *s);
void ESP8266_Init(void);
void ESP8266_SendString(unsigned char *s);
void ESP8266_ReceiveString(unsigned char *s);

void main()
{
unsigned char str[100];
unsigned char temp[50];

LCD_Init();
ESP8266_Init();

while(1)
{
      ESP8266_ReceiveString(str);
      sprintf(temp, "%s", str);
      LCD_WriteString(1,1,temp);
}
}

void delay(unsigned int i)
{
while(i--);
}

void LCD_Init(void)
{
delay(10000);
LCD_WriteCommand(0x30);
delay(5000);
LCD_WriteCommand(0x30);
delay(5000);
LCD_WriteCommand(0x30);
delay(5000);
LCD_WriteCommand(0x38);
LCD_WriteCommand(0x0C);
LCD_WriteCommand(0x06);
LCD_WriteCommand(0x01);
}

void LCD_WriteCommand(unsigned char Command)
{
RS = 0;
RW = 0;
E = 1;
LCD_D4 = Command >> 4;
LCD_D5 = Command >> 5;
LCD_D6 = Command >> 6;
LCD_D7 = Command >> 7;
E = 0;
delay(50);
E = 1;
LCD_D4 = Command & 0x0F;
LCD_D5 = (Command & 0x1F) >> 4;

LCD_D6 = (Command & 0x3F) >> 5;
LCD_D7 = (Command & 0x7F) >> 6;
E = 0;
delay(50);
}

void LCD_WriteData(unsigned char Data)
{
RS = 1;
RW = 0;
E = 1;
LCD_D4 = Data >> 4;
LCD_D5 = Data >> 5;
LCD_D6 = Data >> 6;
LCD_D7 = Data >> 7;
E = 0;
delay(50);
E = 1;
LCD_D4 = Data & 0x0F;
LCD_D5 = (Data & 0x1F) >> 4;
LCD_D6 = (Data & 0x3F) >> 5;
LCD_D7 = (Data & 0x7F) >> 6;
E = 0;
delay(50);
}

void LCD_WriteString(unsigned char x,unsigned char y,unsigned char *s)
{
unsigned char address;

if(y==0)
address = 0x80 + x;
else
address = 0xC0 + x;

LCD_WriteCommand(address);

while(*s)
{
LCD_WriteData(*s);
s++;
}
}

void ESP8266_Init(void)
{
ESP8266_RST = 0;
delay(50000);
ESP8266_RST = 1;
delay(50000);
ESP8266_SendString("AT\r\n");
delay(10000);
ESP8266_SendString("AT+CWMODE=1\r\n");
delay(10000);
ESP8266_SendString("AT+CWJAP="SSID","password"\r\n"); //replace "SSID" and "password" with your WiFi SSID and password
delay(20000);
}

void ESP8266_SendString(unsigned char *s)
{
while(*s)
{
SBUF = *s;
while(TI == 0);
TI = 0;
s++;
}
}

void ESP8266_ReceiveString(unsigned char *s)
{
unsigned char i;

kotlin
Copy code
while(1)
{
if(RI == 1)
{
      *s = SBUF;
      RI = 0;
      s++;

      if(*s == '\n' || *s == '\r')
      {
         *s = '\0';
         break;
      }
}
}
}

此示代碼僅適用於ESP8266模塊與STC12C5608AD-35I-SKDIP28微控制器之間的通信，還需要添加相應的代碼以支持攝像頭模塊和其他功能。

歡迎光臨冰楓論壇 (https://bingfong.com/)